Custom tear off caps for pharmaceutical and cosmetic packaging
Our tear-off caps are produced from aluminium strips, which can be coated with transparent or coloured lacquers, resistant to autoclave sterilization. We produce a range of caps including central tear-off, total tear off or with central hole.
We also produce aluminium rings at our factory, available in any colour and logo, for assembling plastic pourers.
Our range of caps is mainly for pharmaceutical and cosmetic use. We are also to able to supply gamma-ray sterilized caps or closures upon request.
The table below shows the diameters and heights most commonly used for tear-off caps. However, we are able to customize the heights and hole size according to customer specification. Upon specific request, we can also provide drawings and technical datasheets. Our technical office is available for any changes and customization of cap formats.
|8 mm||4,9 mm||Hole 4 mm|
|11 mm||5,8 mm||Hole 5,5 mm|
|13 mm||6,5 mm||Central / Total|
|20 mm||7,5 mm||Hole / Central / Total|
|29 mm||10,5 mm||Central|
|32 mm||11,5 mm||Central|
|32 mm||13 mm||Central|
|33 mm||10,8 mm||Hole 30,1 mm|
|33 mm||11,5 mm||Hole 30,1 mm|
*The model differs in the opening technology which occurs differently for the different capsules
Tear-off capsDiametre = D
Height = H
Modell* = M
|8mm||4,9mm||Hole 4 mm|
|11mm||5,8mm||Hole 5,5 mm|
|13mm||6,5mm||Central / Total|
|20mm||7,5mm||Hole / Central / Total|
Heigh = H
Model* = M
|33 mm||10,8 mm||Foro 30,1 mm|
|33 mm||11,5 mm||Foro 30,1 mm|